联系我们

公司名称:XXX

电话:XXX

手机:XXX

联系人:XXX

地址:XXX

新闻动态
充气玩具的维护办法
1.为了保证您的设备达到正常的使用年限,在开机游玩时不能参加过多的孩子游玩。一般在气模上容纳3平方米一个孩子。
1. in order to ensure that your equipment can reach the normal service life, you can not participate in too many children during the start of the game. The general capacity of 3 square meters of a child in the air on.
2.设施上的小造型起装饰作用,不能让孩子硬拉、硬撕以免损坏。
The small shape of the 2. facilities plays a decorative role, so the child can not be hard pulled and tore hard to avoid damage.
3.孩子游玩时,不能让孩子用坚硬物在设备上乱写乱画,以免损坏。
3. children play, can not let the children scribble on the device with graffiti hard to avoid damage.
4.如遇设备破损,可在破损处和备用的PVC材料上都涂上专用胶,待胶5分钟后不粘手,将其粘合,适当挤压,数分钟便可以使用。
4., in case of breakage of equipment, special glue can be applied to the damaged part and the spare PVC material. After 5 minutes, the adhesive is not sticky. It can be glued and pressed properly, and it can be used for several minutes.
5.设备上的气压太软,检查有没有过多漏气,撕洞,或者停电;气压太硬,要把风机 的进风口遮挡一点。
The pressure is 5. on the device, check there is no excessive leakage, tearing holes, or power; pressure is too hard to block the air inlet fan.
6.如大面积非正常使用损坏,厂方可以提供专业维修服务,或者直接寄回厂里进行维修。
6. if a large area of abnormal use of damage, the factory can provide professional maintenance services, or directly back to the factory for maintenance.

联系方式

  1. 公司名称:XXX
  2. 电话:XXX
  3. 手机:XXX
  4. 联系人:XXX
  5. 地址:XXX

版权 © 保定大型充气玩具厂 网址:wanji.89ix.com  推荐:大型充气玩具,儿童充气玩具,卡通充气玩具

网站建设及优化保定遨游网络公司