大型充气玩具注意事项
Notes for Large Inflatable Toys
1、首先要检查场地是否平整，是否有玻璃、钉子等尖锐物品，以免扎破玩具。
1. First of all, we should check whether the venue is level and whether there are sharp objects such as glass and nails, so as to avoid puncturing toys.
2、防风措施是否做好？
2. Are windbreak measures well done?
3、场地内若电器设备较多，必须依次启动电器设备，禁止多组电器设备同时启动。待设备充起后必须清洁产品，检车充气设备和电器设备是否有破损，老化现象，如有问题及时维修或更换。
3. If there are more electrical equipment in the site, it is necessary to start electrical equipment in turn. It is forbidden to start multiple sets of electrical equipment at the same time. After the equipment fills up, the product must be cleaned. Whether the vehicle inflatable equipment and electrical equipment are damaged or ageing, if there are problems, repair or replace them in time.
4、产品每天开放前工作人员必须对设备运行状态监控10-15分钟，检车设备固定是否正常，有无偏离固定位置、固定或连接松脱。
4. Workers must monitor the running status of the equipment for 10-15 minutes before the product opens every day, check whether the equipment is fixed properly, whether there is deviation from the fixed position, fixed or loose connection.
5、使用拉链等金属结构，开合不顺利，此时用石蜡或润滑油喷雾涂于结构表面和里面，然后开合数次后即可顺畅使用。
5, the use of zippers and other metal structures, opening and closing is not smooth, then use paraffin or lubricating oil spray on the surface and inside the structure, and then open several times after it can be used smoothly.
6、远离烟花、爆竹等易燃易爆物体。
6. Keep away from inflammable and explosive objects such as fireworks and firecrackers.