返回首页

保定大型充气玩具厂

本站导航

新闻动态

当前位置:网站首页 > 新闻动态 > 详细信息
充气玩具该怎么维护
添加时间:2018/4/4 16:42:31     浏览次数:
1.为了保证您的设备达到正常的使用年限,在开机游玩时不能参加过多的孩子游玩。一般在气模上容纳3平方米一个孩子。
1. in order to ensure that your equipment can reach the normal service life, you can not participate in too many children during the start of the game. The general capacity of 3 square meters of a child in the air on.
2.设施上的小造型起装饰作用,不能让孩子硬拉、硬撕以免损坏。
The small shape of the 2. facilities plays a decorative role, so the child can not be hard pulled and tore hard to avoid damage.
3.孩子游玩时,不能让孩子用坚硬物在设备上乱写乱画,以免损坏。
3. children play, can not let the children scribble on the device with graffiti hard to avoid damage.
4.如遇设备破损,可在破损处和备用的PVC材料上都涂上专用胶,待胶5分钟后不粘手,将其粘合,适当挤压,数分钟便可以使用。
4., in case of breakage of equipment, special glue can be applied to the damaged part and the spare PVC material. After 5 minutes, the adhesive is not sticky. It can be glued and pressed properly, and it can be used for several minutes.
5.设备上的气压太软,检查有没有过多漏气,撕洞,或者停电;气压太硬,要把风机 的进风口遮挡一点。
The pressure is 5. on the device, check there is no excessive leakage, tearing holes, or power; pressure is too hard to block the air inlet fan.
6.如大面积非正常使用损坏,厂方可以提供专业维修服务,或者直接寄回厂里进行维修。
6. if a large area of abnormal use of damage, the factory can provide professional maintenance services, or directly back to the factory for maintenance.
上一页  充气玩具有哪些注意事项  
下一页  玩具的安全
  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 产品分类1
  • 产品分类2
  • 产品分类3

Copyright © 技术支持:遨游网络

  • 联系我们
  • 网上订单
  • 工程案例
  • 本站导航

搜索

  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 产品分类1
  • 产品分类2
  • 产品分类3